[SusanMae]

The BLVD has a bar that goes around the sides and front...and it has two straps on either side with a latch connector on the end. So there are 2 tails to pull. When it's time to turn from RF to FF...you have to switch which side the connectors are on to the opposite side.

The decathalon has 1 strap with a connector on either end. When it's time to switch from RF to FF you have to move the strap from the RF belt path to the FF belt path.

I don't think either method is hard, just different and maybe a personal preference type thing.

Susan

	Forward Facing Car Seats A forward-facing car seat is one in which the child sits facing the front of the car. The seat should be installed in the back seat of your vehicle. Most forward-facing only seats are for children above 20 pounds.

	Rear Facing Car Seats A rear-facing seat is one in which the infant faces the back of the car. Always install a rear-facing seat in the back seat of your car. This is the safest position for an infant. NEVER place a rear-facing seat in the front seat of a vehicle with passenger airbags.

	Britax Boulevard - Click for more info It is all about the wings with the Britax Boulevard convertible car seat - head and torso safety wings help keep your child from harm in a side-impact crash. And this matters - side-impact crashes are the leading cause of death for 6 - 14 year-old children. Of course, the safety wings are only one of the many safety features that the Britax Boulevard offers: built-in lock-offs, 5-point harness with front adjuster, tangle-free webbing, a push button release LATCH system with Versa-Tether®, and a sculpted base, ensuring an easy installation with a secure fit.

	LATCH LATCH stands for Lower Anchors and Tethers for CHildren. It is a system mandated by the Federal government in an effort to standardize and simplify the installation of child restraints without using the vehicle's seat belt system. New vehicles and child safety seats manufactured on and after September 1, 2002 will be equipped with the LATCH system. Cars, minivans, and light trucks will be required to have anchor points between the vehicle's seat cushion and the seat back in at least two rear seating positions, and a top tether anchor (with the exception of convertibles). Child safety seats will have a lower set of attachments that fasten to the vehicle anchors. Most forward-facing child safety seats will also have a top strap (tether) that attaches to the top anchor in the vehicle.