Install on a Scion tC

[mrsdeiser]

I have a Scion tC and i'm trying to install the Graco SafeSeat in it. I dont have an owners manual for the car so i'm not really sure where and how i can install the car seat. I have tried installing it in the back seat, on both sides and it takes up so much space that you cant get the front seats back far enough to be safe for the front passengers. But it does seem to fit pretty good (doesnt wiggle) in the middle position, but can i have it in the middle position in that type of car? And the back of the car seat does touch both of the front seats, is that safe? And i used the LATCH system, is that okay? Any help would be great!

Here are some pics of my install! Along with one of the backseat with nothing in it.

	Graco - Click for more info Graco is one of the world's best known and most trusted juvenile products companies. They started the entire juvenile products industry with an invention called the Graco Swyngomatic. Since then they have invented products that have changed the way that parents travel with their children such as the travel system, which has made it so parents can lock an infant car seat into a stroller easily, without waking their sleeping baby. Their Graco SnugRide Infant Car Seat is pretty much synonymous with the term “infant car seat” because of its safety and design features coupled with its affordability. Today Graco continues designing and developing top-quality products that inspire parents and keeps children safe. Check out the new Infant Safe Seat Step 1 and Toddler Safe Seat Step 2 for proof of Graco’s continued commitment to child safety.

	Graco Safe Seat Step 1 - Click for more info The Graco Safe Seat (Step 1)—if you couldn't gather from the name— is intended to be the first of a three-seat process. The Step 1 is for infants in a rear-facing position; the Step 2 is for bigger, older kids in the forward-position; the Step 3 is a belt-positioning booster seat without the safety harness of the previous two.

	LATCH LATCH stands for Lower Anchors and Tethers for CHildren. It is a system mandated by the Federal government in an effort to standardize and simplify the installation of child restraints without using the vehicle's seat belt system. New vehicles and child safety seats manufactured on and after September 1, 2002 will be equipped with the LATCH system. Cars, minivans, and light trucks will be required to have anchor points between the vehicle's seat cushion and the seat back in at least two rear seating positions, and a top tether anchor (with the exception of convertibles). Child safety seats will have a lower set of attachments that fasten to the vehicle anchors. Most forward-facing child safety seats will also have a top strap (tether) that attaches to the top anchor in the vehicle.

[mommytobee07]

yes, you can put an infant seat in the middle of a scion. that install looks fine to me.

	Infant Car Seats Infant-only rear-facing seats are for babies up to about 22 to 30 pounds, depending on the specific car seat. You will need a new seat when your child gets bigger. Infant-only seats have handles that allow you to move the seat from the car to the house or other locations. Some have a base that you can leave installed in the car, so you can just click the car seat into place each time you use it.

[fangy47]

A center installation in a Toyota is generally not allowed using the LATCH system. The excerpt for the Quick Ref guide from the LATCH manual is here.

You can use center seat belt to attach your SafeSeat to the car. I would also make sure to follow the child seat manual's instructions for a seat belt installation and that the child seat does not touch the driver and passenger seats (~1-2 inch clearance space).

Hope that helps!

	Graco Safe Seat Step 1 - Click for more info The Graco Safe Seat (Step 1)—if you couldn't gather from the name— is intended to be the first of a three-seat process. The Step 1 is for infants in a rear-facing position; the Step 2 is for bigger, older kids in the forward-position; the Step 3 is a belt-positioning booster seat without the safety harness of the previous two.

	LATCH LATCH stands for Lower Anchors and Tethers for CHildren. It is a system mandated by the Federal government in an effort to standardize and simplify the installation of child restraints without using the vehicle's seat belt system. New vehicles and child safety seats manufactured on and after September 1, 2002 will be equipped with the LATCH system. Cars, minivans, and light trucks will be required to have anchor points between the vehicle's seat cushion and the seat back in at least two rear seating positions, and a top tether anchor (with the exception of convertibles). Child safety seats will have a lower set of attachments that fasten to the vehicle anchors. Most forward-facing child safety seats will also have a top strap (tether) that attaches to the top anchor in the vehicle.